* Bunk bed frame
* Wooden slats
* Ladder can be built to the Left or Right
* Bunk bed frame splits into 2 single beds
* This bed requires 2 mattresses, size 90 x 200cm. Mattress should not exceed a depth of 15cm
* Matching furniture available in this range
- Length: 2074mm
- Width: 1115mm
- Height: 1643mm
Splits into two single beds - measure of each bed: H595mm x W1015mm x L2074mm
Write a review and let shoppers know what you think of this product.
I found this a little difficult to assemble but once it was completed i understood why it was built in that way. Make sure use use the correct dowels in the middle sections of the bed as this gives it is extra stability and strength
Great quality sturdy bunk bed with plenty of head room in lower bunk compared to most on the market. Our youngest loves the bottom bunk (his den) and the shelves are brilliant for all his bits. Our eldest loves being up top and we added a couple of Argos picture shelves (£15 for 2) so he has somewhere to store his bits. Also plenty of room underneath for storage boxes of toys. We're using the 190x90 mattresses from their old beds and this isn't a problem. There's only a 5cm gap at either end and they love 'posting' things to each other through the gaps! I built this on my own in 4 hours and have a few tips. Make sure you use the instructions from the bunk bed kit box and build the 3 sections separately. Make sure you use the correct dowels or the sections won't join together properly (1 set of dowels are 10mm longer than the others!). If building on your own lay the 3 completed sections on their sides to join them together and then you can just lift it up and do the slats at the very end when it is in position. Highly recommend this bunk!!